Spring Replacement Cost in Tuscaloosa - What It Actually Costs, Quoted Free

Raised-panel steel

Carriage house

Modern flush

Full-view glass

LiftMaster openers

Chamberlain openers

Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

We have financing partners for your new garage door

You get a price before we start. It does not change when the pro arrives.

Get your free estimate

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

How Much Does Spring Replacement Cost in Tuscaloosa?

Spring replacement in Tuscaloosa typically costs $160-$305 per spring, with torsion springs at the upper end of that range and extension springs at the lower end. A matched pair is almost always replaced together, so a two-spring job usually runs about twice that, roughly $320-$610. That estimate covers the springs and the labor to install them; the written estimate you get before any work starts sets the final price.

We’re Ashby Garage Door Repair, and garage doors are the only trade we work in. If your door won’t lift or you heard a loud snap from the ceiling of the garage, call (855) 758-0653. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Estimates are free.

Key Takeaways

• One spring: $160-$305 installed, typical estimate for the Tuscaloosa market.
• Matched pair: about $320-$610, since both springs are replaced together.
• Spring replacement is the single most common garage door repair we handle, and it’s rarely a job for a homeowner to take on.
• The written estimate sets the final price, so expect no surprises once the technician is on site.
• Free estimates. Call (855) 758-0653.

Spring Replacement Cost Breakdown (2026)

Here’s how the numbers shake out for the work most Tuscaloosa homeowners actually need. These are typical estimated ranges, and the written estimate you receive before the job begins sets the final price.

A spring doesn’t usually fail alone. When a torsion spring snaps, the cables and drums absorb the shock, and the rollers wear faster once the door’s balance is off. That’s why a spring job sometimes grows into a cable or roller repair once the technician gets the door opened up and can see what the spring took with it. We diagnose first and quote the whole picture before we touch anything.

What pushes a spring job toward the top of the range? Heavier doors, springs that need custom winding specs, torsion systems instead of extension systems, and doors where the drums, cables or center bearing plate also need attention. What keeps it near the bottom? A straightforward extension spring swap on a standard single-car door with everything else in good shape.

What Affects Spring Replacement Pricing in Tuscaloosa

Tuscaloosa homes have their own set of conditions, and those conditions shape what a spring job looks like from the ladder. Here’s what moves the number up or down:

• Torsion versus extension systems. Torsion springs mount on a shaft above the door and carry most of the weight on modern doors. Extension springs run along the sides and are common on older doors. Torsion work takes more setup and knowledge, which puts it toward the top of the $160-$305 range. Extension springs sit near the bottom.
• Single versus double-car doors. A double-car door weighs considerably more, so it runs heavier springs and takes longer to dial in the balance. That’s one reason a two-door or oversized garage job lands higher.
• How many springs are on the door. Most doors carry two springs, and when one breaks the other has usually taken the same load. Replacing the pair at once (roughly $320-$610) costs less than two separate visits, and it keeps you from a second failure a few months down the road.
• What the broken spring damaged on the way out. Cables, drums, rollers, and the opener’s gear and rail all take force when a spring lets go. A snapped spring can strip a LiftMaster or Chamberlain opener’s gear within seconds. Expect $110-$290 if the opener needs repair on top of the springs.
• Heat and humidity through the Alabama summer. The long, hot stretch Tuscaloosa gets each year works metal hard. Springs live their whole life under load, and the cycles add up through summer temperature swings. Heat doesn’t break a spring by itself, but a door that gets used a dozen times a day in July wears its springs out faster than one that’s used sparingly, and that wear shows up in the torque the spring can no longer hold.
• Door age and balance. An older door with original hardware often needs more than springs. If the tracks are out of line (track realignment runs $110-$215) or the rollers are flat-spotted ($100-$200), those get addressed in the same visit to keep the new springs from fighting the rest of the system.

Springs are also a brand-specific part, which is where our focus pays off. We work on Clopay, Amarr, Wayne Dalton and Raynor doors every week, along with LiftMaster, Chamberlain, Genie and Craftsman openers. Whether your opener is a LiftMaster, Genie, or Chamberlain, we know it, and the technician arrives with the right spring specs for the door rather than guessing. From a snapped spring to a full door replacement, one call handles it.

How to Save on Spring Replacement

There’s not much room to shave labor off a spring job, but a few practical moves can keep the total down without cutting corners:

• Replace both springs at once. When one spring breaks, the other has usually cycled just as many times. Doing the pair in a single visit (about $320-$610) usually beats paying for two separate service calls, and you avoid a second outage.
• Bundle small repairs into the same visit. If your rollers are noisy or a cable is frayed, add it to the spring appointment. Roller replacement runs $100-$200 and cable repair $115-$225, and folding them in saves the trip.
• Get the balance checked after installation. A properly wound spring, a level door, and correct opener force settings let the whole system last longer. That’s part of every job we do.
• Skip the hardware-store spring swap. Cheap aftermarket springs from a big-box shelf are often undersized for the door’s weight, and they don’t come with the safe winding process. A spring done wrong can fail in months instead of years.
• Ask for a written estimate before work starts. Free estimates keep you in control of the total. Call (855) 758-0653 and we’ll quote it before any work begins.

One thing worth being clear about: springs are under extreme tension. Torsion springs especially store enough energy to cause serious injury if a winding bar slips or a spring lets go at the wrong moment. This isn’t a job to learn from a video, and we’d rather you call a trained professional than take that risk. A technician who does spring work every day knows the winding procedure, the right bar technique, and how to check the door’s balance safely.

Why Spring Repairs Go Wrong the First Time

We hear the same story in Tuscaloosa fairly often: a door “repaired” last year is stuck again, or the opener stopped working after what looked like a simple fix. Usually the original problem was misdiagnosed. A grinding opener gets blamed on the opener when the real cause is a spring that’s lost tension and is dragging the door. A door that won’t close looks like a sensor fault when the tracks are out of alignment. We diagnose first, so you don’t pay for parts you don’t need.

Because we service eight major brands, we’re brand-agnostic on purpose. If your door is a Clopay and a Wayne Dalton spring is the right match for its weight and balance, we’ll tell you. No pressure to replace with a preferred brand, and no upselling a whole new door when a pair of springs will solve it. If the door genuinely is at the end of its life, we’ll show you why and quote a new door installation ($630-$1,980) so you can compare.

Same-day service is often possible for spring failures. Call in the morning and we’ll do our best to get a technician to you before the heat of the afternoon. For more detail on how we work in the area, see our page on Tuscaloosa garage door service.

FAQs – Spring Replacement Cost

How much does spring replacement cost in Tuscaloosa?

A typical spring replacement runs $160-$305 per spring, and most doors need a matched pair, so expect roughly $320-$610 for the full job. The written estimate sets the final price. Call (855) 758-0653 for an exact quote; estimates are free.

Should I replace both springs or just the broken one?

Replace both, in almost every case. A pair costs about $320-$610, while doing them one at a time means two service visits and a second outage, usually within months. The springs on a door cycle together and wear together. Call (855) 758-0653 and we’ll quote the pair for your door.

Can you fix a broken spring the same day?

Same-day spring replacement is often possible when you call early. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (855) 758-0653 and we’ll book the next opening for your door.

Why did my spring break, and can I prevent it?

Springs break because they’ve reached the end of their cycle life, usually after many thousands of open-and-close cycles, not because of one bad day. You can extend the next set by keeping the door balanced, lubricating moving parts, and addressing a grinding opener before it puts extra strain on the springs. If a spring does let go, don’t run the door. Call (855) 758-0653 and we’ll get a technician to you.

Is it worth repairing a spring or replacing the whole door?

Spring replacement ($160-$305 per spring) is almost always the answer unless the door itself is warped, rusted through, or damaged in a way that repair can’t fix. A panel replacement runs $225-$450 if the door is otherwise sound, which is far less than a new door ($630-$1,980). Call (855) 758-0653 and we’ll give you both options with a free estimate.

Get a Free Spring Replacement Estimate

A broken spring stops your door, and it can damage your opener, your tracks, and your cables if it goes unaddressed. We work on springs for Clopay, Amarr, Wayne Dalton and Raynor doors and handle LiftMaster, Chamberlain, Genie and Craftsman openers in the same visit. Our technicians have up to 9 years of experience, and we’re insured & bonded. From a snapped spring to a full door replacement, one call handles it.

Call (855) 758-0653 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.

Pricing reflects the Tuscaloosa market as of 2026. Ashby Garage Door Repair offers free estimates. Call (855) 758-0653.

Written by the team at Ashby Garage Door Repair.